Benefits
ChatGPT:
Humidity control is vital in automotive production. It reduces dust and static, improves surfaces, ensures clean paint application, stabilizes engine test conditions, and boosts quality and efficiency.
Prevents dust
Prevents airborne dust from being attracted to the surface of the bodywork
Reduced static
Air humidification prevents static (ESD) and boosts production efficiency above 40% RH.
Evaporation control
Prevents paint evaporation, ensures even coverage, adhesion, and smooth film.
Automotive manufacturing humidity control
Car spraying plants
Maintaining 72% relative humidity ensures water-based paint reaches the bodywork as intended, preventing evaporation and reducing paint dust. This improves finish quality, lowers sanding needs, and cuts paint costs by avoiding losses. Spray booths are usually served by central air handling units with in-duct humidifiers. High air flows require low-energy systems such as spray, evaporative, or gas-fired steam humidification.
Engine testing
Exhaust emission testing requires precise temperature and humidity control, to ensure accurate results. Humidification and dehumidification must maintain tight tolerances throughout this range. Electric steam humidifiers provide precise control, while gas-fired steam, evaporative, or in-duct spray systems offer a lower-cost, lower-maintenance alternative. Dehumidification is accomplished with an desiccant dryer.
Sanding decks
By maintaining 55% relative humidity in sanding decks, dust is suppressed and static build-up reduced. This prevents airborne paint dust from being attracted to the surface of the bodywork, greatly decreasing sanding time and improving the quality of the finish.
Use Cases
Prevent Evaporative Losses
Organic materials have an internal moisture content and will lose moisture to the atmosphere when exposed to air with low humidity. Humidifiers are used to create an environment with the proper balance between the material’s internal moisture content and the air’s relative humidity.
Anti-Static and ESD Prevention
Low humidity increases static buildup because dry air acts as an insulator, making electrostatic discharge (ESD) more likely. Maintaining 40–60% relative humidity helps dissipate electrical charges and significantly reduces ESD risk.
Discover Condair in action
Kay Automotive Graphics
Kay Automotive Graphics is the leading worldwide OEM supplier of distinctive high-quality automotive trim.
Polycon Industries
A leading global automotive supplier with 305 manufacturing operations and 93 product development, engineering and sales centres in 29 countries.
Nova Bus - Volvo
Manufacturing facility located in Plattsburgh , New York.
Calibre Inc.
Calibre Inc. is an Employee Owned Company operating multiple facilities within Southeastern Wisconsin since 1981. They provide painted part solutions for use in exclusive Powersports products.
Ford Canada
Ford Motor Company of Canada, Limited was founded on August 17, 1904 for the purpose of manufacturing and selling Ford automobiles in Canada.
Jaguar Land Rover, UK
Jaguar Land Rover employ Condair evaporative humidifiers for use in its exhaust emissions testing facility at the company's Product Compliance Centre in Solihull, UK. The evaporative humidifiers provide humidity control to two rolling-road engine test cells to ensure compliance with international environmental parameters.
Aston Martin
Condair JetSpray humidification systems are maintaining the humidity in the finishing areas at Aston Martin's Newport Pagnell and Bloxham plants. By maintaining a level of humidity at 55%RH, any dust that is in the atmosphere around the cars is suppressed, giving a much finer finish during the painting and sanding processes.
Volkswagen Nutzfahrzeuge AG, Hannover (Germany)
The Volkswagen plant in Hanover is the main plant of Volkswagen Commercial Vehicles, an independent brand of the Volkswagen Group. With a total area of 120 hectares and over 14,000 employees, it is the largest production facility for the Transporter and Amarok series.
Hella GmbH & Co. KGaA, Recklinghausen (Germany)
Direct room humidification can be used both for conditioning the room air and for process cooling. The automotive supplier HELLA in Recklinghausen makes use of the principle of adiabatic cooling with additional air humidification.
Asteelflash Hersfeld GmbH, Bad Hersfeld (Germany)
To protect against electrostatic discharge, ensure quality assurance, and protect the health of its employees, Asteelflash uses in-room humidification systems in its printed circuit board assembly.
Mercedes-Benz Museum, Stuttgart - Germany
At the Mercedes-Benz Museum, the Condair DL delivers precise, hygienic humidification to protect exhibits and ensure optimal indoor climate for visitors.
Porsche Museum, Zuffenhausen - Germany
Explore the Porsche Museum‚the floating architecture and exhibits. Condair steam humidifiers deliver precise humidity control to protect valuable collections.
Ferrari, Maranello, Italy
Ferrari's historic headquarters in Maranello was modernized in 2010 with advanced production facilities, including a high-tech wind tunnel and hybrid engine test stand. Condair‚ resistance steam humidifiers ensure precise humidity control, supporting the development of Ferrari‚ next generation of high-performance sports cars.
The Condair RS steam humidifiers boast patented limescale management which prevents permanent deposition of limescale on heater rods. Limestone crusts are successively detached and removed from the steam cylinder into the limescale collection vessel. Limestone management ensures extremely short waiting times and a long life.
The innovative control system fitted with a touch display ensures outstanding transparency of function and precise steam delivery. The units are the result of decades of experience and they define the state of the art in modern steam humidification.
The Condair RS steam humidifiers boast patented limescale management which prevents permanent deposition of limescale on heater rods. Limestone crusts are successively detached and removed from the steam cylinder into the limescale collection vessel. Limestone management ensures extremely short waiting times and a long life.
The innovative control system fitted with a touch display ensures outstanding transparency of function and precise steam delivery. The units are the result of decades of experience and they define the state of the art in modern steam humidification.
FAW Volkswagen, Tianjin
As part of Volkswagen's global electrification strategy, Tianjin contributes significantly to the brand's mission of delivering innovative mobility solutions for the Chinese market.
Volkswagen Tianjin has selected the Condair ECO3 electrode humidifier for its central air conditioning system to ensure the humidity requirements of the production environment.
Volkswagen Tianjin has selected the Condair ECO3 electrode humidifier for its central air conditioning system to ensure the humidity requirements of the production environment.
Hella GmbH & Co. KGaA, Recklinghausen (Germany)
ESD protection, additional cooling and greater employee satisfaction are the key benefits of in-room humidification at the HELLA electronics plant.
Frequently asked questions
How controlled humidity enhances the sanding process in the automotive manufacturing?
How does humidity control increase production efficiency for automotive manufacturing?
Why is a humidity level of 72% recommended in paint spray booths for automotive manufacturing?
Get Free Expert Advice
If you want to explore your options for humidity control, a Condair's expert will visit your site, review your project and talk you through their recommendations.
Alternatively, if you would prefer a call or online meeting, our team is always happy to discuss possible solutions and offer free technical advice.
You may also be interested in
Need more information
or expert guidance?
or expert guidance?
Get in Touch with Condair
Contact Your Local Condair Rep
Contact your local Condair representative who can help you with all of your humidification, dehumidification, and evaporative cooling projects.
Contact Condair in North America
Not sure where to start? Contact us and we’ll direct your enquiry to the appropriate Condair representative or department.